Need some quick help with Dahua 4k turret housing

[Arkangel86]

I was told PFA137 would fit, but obviously not.

Can someone please tell me what housing works so i can Amazon overnight it please!

Thanks

 

[aristobrat]

If that’s this camera, check out the Accessory tab at the bottom:
IPC-HDW4231EM-AS,IPC HDW4231EM AS,IPCHDW4231EMAS

Looks like it’s the PFA139 that fits?

 

[Arkangel86]

Thanks, its actually a

Dahua 4k turret IPC-HDW4831EM-ASE

Looks like its PFA130-E

Thanks again

 

[drewgost]

Try this IPC-HDW4831EM-ASE

 

[mat200]

The PFA137 fits the turret w/2 IR leds, like the IPC-HDW5231xx ( slightly larger turret )

The PFA139 is for the turrets w/only 1 IR led - like yours.

The PFA130-E is new, and iirc should work with both... however you will want to confirm before purchasing.

OF course, now the solution is to buy a IPC-HDW5231xx to match that junction box!

 

[Arkangel86]

The PFA137 fits the turret w/2 IR leds, like the IPC-HDW5231xx ( slightly larger turret )

The PFA139 is for the turrets w/only 1 IR led - like yours.

The PFA130-E is new, and iirc should work with both... however you will want to confirm before purchasing.

OF course, now the solution is to buy a IPC-HDW5231xx to match that junction box!

So the Pfa-139 will also work with my 4k turret?

 

[mat200]

Should according to my accessories sheet...

for a nicer one, you may want to get the PFA130E, which is listed to work with that as per the following spec sheet
( there's a thread on the PFA130-E so please feel free to search for it )

http://me.dahuasecurity.com/download/DH-IPC-HDW4831EM-ASE_datasheet_201707043.pdf

 

[keithl]

I used the PFA139 since it is same size as the base of the turret, the only downside is there is not very much room inside the box once you put all the cables in it. I am putting together some docs and pics of the setup I installed using almost only the Eco-Savvy 3.0 torrents.

 

[keithl]

Here are some samples of my HDW4231EM-ASE and HDW4831EM-ASE with the PFA 139 and one where I used the PFB204W, the entire turret line (2, 4, 6, 8MP) are all the same size. The PFA139 I do not believe is weather proof (but none of mine are exposed directly to the weather), where the PFA130 is, but the 130 is much larger and a square box making it look rather obnoxious if you ask me. The PFA139 just looks like an extension of the camera.

 

[Arjun]

Like the clean setup, cheers