Need to replace female ethernet port on Dahua IP15A Camera

Jul 10, 2017
2
0
Had an issue where our outdoor cameras ethernet port was sitting in water. The inside was all corroded. We thought 'no problem' we'll just cut it and attach a new end. We were unaware that there are only 6 wires and none of the colors match? We contacted Dahua and we are 17 days out of warranty and they will not provide us with a wiring diagram so we know which pins to connect which wires to. Any help will be greatly appreciated! I have attached a picture of the wires below. One of the yellows faded to orange right at the connector.

File_000.jpeg
 
Sorry, Not very experienced with this stuff. I did however find it once using the word pinout instead of wiring diagram. Much appreciated.
 
Connect the following colored dahua-cables to the following utp cable: Orange-White to Brown / Orange to Purple / Green-white to Orange / Blue to Yellow / Blue-white to Green / Green to Blue / Brown-White to Grey / Brown to White.. then you can connect your UTP cable to an PoE outlet and the camera will work. Good luck!