I have a Ubiquiti Unifi network that consists of a Unifi Dream Machine Pro gateway/router, 24-port switch, 24-port PoE switch and 6-port PoE switch. Currently, I have 14 cameras connected to my 24-port PoE switch. My other 3 cameras are plugged into my 8-port PoE switch that's not in my network rack. The two 24-port switches connect to the UDM Pro via 10 gig SFPs. The 8-port connects to the UDM Pro via RJ45 Cat 6.
My question is, should my BI PC be plugged into the PoE switch with the rest of the cameras? I could plug it into the UDM or other 24-port switch. One thing I've noticed, the BI PC runs a steady 160 Mbps and when I run an internet speed test, I don't get the full 1 gig up/down. This makes sense considering the steady camera bandwidth from the 17 cameras. Currently, the BI PC is connected to the non PoE 24-port switch.
Does it make any difference as far as BI UI3 or mobile app performance which switch I use? Thanks!
My question is, should my BI PC be plugged into the PoE switch with the rest of the cameras? I could plug it into the UDM or other 24-port switch. One thing I've noticed, the BI PC runs a steady 160 Mbps and when I run an internet speed test, I don't get the full 1 gig up/down. This makes sense considering the steady camera bandwidth from the 17 cameras. Currently, the BI PC is connected to the non PoE 24-port switch.
Does it make any difference as far as BI UI3 or mobile app performance which switch I use? Thanks!