Results from downstairs switch (40m cat6 cca direct to gatweway inside wall).
Better than the previous result by the looks of it. So maybe due to the cat6 as opposed to the
cat5e. Looks fairly acceptable for cca if I'm not wrong.
525
440
jitter 0.056
Loss 55/374370 (0.015%)
[ 5] local 192.168.1.206 port 5001 connected with 192.168.1.54 port 64888 (isoch)
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 5] 0.00-1.00 sec 52.6 MBytes 441 Mbits/sec 0.007 ms 35/37564 (0.093%)
[ 5] 1.00-2.00 sec 54.5 MBytes 457 Mbits/sec 0.001 ms 0/38882 (0%)
[ 5] 2.00-3.00 sec 53.7 MBytes 450 Mbits/sec 0.002 ms 190/38483 (0.49%)
[ 5] 3.00-4.00 sec 52.2 MBytes 438 Mbits/sec 0.001 ms 0/37243 (0%)
[ 5] 4.00-5.00 sec 53.1 MBytes 446 Mbits/sec 0.062 ms 0/37915 (0%)
[ 5] 5.00-6.00 sec 50.1 MBytes 420 Mbits/sec 0.005 ms 0/35722 (0%)
[ 5] 6.00-7.00 sec 51.6 MBytes 433 Mbits/sec 0.043 ms 0/36831 (0%)
[ 5] 7.00-8.00 sec 51.3 MBytes 431 Mbits/sec 0.016 ms 0/36620 (0%)
[ 5] 8.00-9.00 sec 53.6 MBytes 450 Mbits/sec 0.031 ms 0/38264 (0%)
[ 5] 9.00-10.00 sec 52.9 MBytes 444 Mbits/sec 0.009 ms 0/37779 (0%)
[ 5] 0.00-10.00 sec 526 MBytes 441 Mbits/sec 0.061 ms 225/375380 (0.06%)
So I'll replace the patch cable between the switch upstairs(first test) and gateway with a new copper cat5e or cat6