New Hikvision 2032 access problem - DS-2CD-Min-System

[bisinellaa]

Hi!,
I have bought many new cameras DS-2CD2032-I from chinese sellers, but one of them have access problem.

I reset the camera to have 192.0.0.64 and after many test with autoTftp i can see it in the SADP.

The device tipe show DS-2CD-Min-System 01201502....

But i can't get access from browser, i can only change the IP from SADP

I tried to upload differents version of firmware with autotftp, but with the same results: the software version is always V.4.0.8 build 140610 (show in SADP)

How i can get access to the camera ?

 

[whoslooking]

If the sticker on the camera is 5.30 use the custom downgrader in my signature, if it's lower then use the correct firmware, your camera is running in the basic recovery mode that is all, it's not broken

 

[bisinellaa]

If the sticker on the camera is 5.30 use the custom downgrader in my signature, if it's lower then use the correct firmware, your camera is running in the basic recovery mode that is all, it's not broken

Perfect!! It works!
The camera is not 5.30 but the firmware in the Downgrader folder works !


Thank you very much!

 

[whoslooking]

Glad to help