Night vision nvr

J

Jramosent

Young grasshopper
Dec 2, 2015
87
0
Hey everyone, I have an issue as to I cannot find the setting to switch night vision on or off. I have three cameras connected to my 7600 hikvision nvr and I connect remotely using the ip address. Before I had the nvr the cams were connected to a switch and I was able to access them individually and adjust night vision on or off no problem. With the nvr I'm lose.

Any help
 
Activate "virtual host" so you can also access the cameras GUI through the web interface. That is the only way to access all the funcions on a camera that is directly connected on the NVR POE ports.
 
  • Like
Reactions: fenderman
Securame said:
Activate "virtual host" so you can also access the cameras GUI through the web interface. That is the only way to access all the funcions on a camera that is directly connected on the NVR POE ports.
Click to expand...

Thank you very much. I would have never have figuered it out
 
You must log in or register to reply here.
Top Bottom