Today I got my new ipc-t54ir-ze-s3 camera from Andy, connected it to my 10 years old nvr2104-p-s2.
Most things are working, I can change the main stream and sub stream encoding settings, set device name and so on.
With dmss and with smart pss a have a picture, so far so good.
But i can’t get the rtsp stream working, I have connected the camera to my Poe switch to logon to the camera’s webinterface (because via the nvr that is not working too)
checked all settings but i don’t see a difference with my few years old IPC-T3241T-ZAS camera. Directely connected the rtsp stream is working normally.
Anyone an idee what the problem could be?
Most things are working, I can change the main stream and sub stream encoding settings, set device name and so on.
With dmss and with smart pss a have a picture, so far so good.
But i can’t get the rtsp stream working, I have connected the camera to my Poe switch to logon to the camera’s webinterface (because via the nvr that is not working too)
checked all settings but i don’t see a difference with my few years old IPC-T3241T-ZAS camera. Directely connected the rtsp stream is working normally.
Anyone an idee what the problem could be?