NVMS 7000 PC -> NVMS Mobile: Can only see one Cam at a time

[dddhorn]

Hi All...

I must be having a brain fart...

I have installed several systems using LTS NRVs and then hitting them with a mobile App shows all cameras on the NVR.

I'm trying to help a friend who is not using an NVR, they are using a PC running NVMS 7000.

When I load the mobile App on my phone I can only get one camera at a time to appear. If I change the Port numbers to match the individual cameras I can see each one of them...

Is there a trick to get the PC to behave like the NVR, where all cameras come up in one mobile App?

Either I am missing something simple... (brain fart), or doing this on a PC as apposed to an NVR is much different?

Right now, if I just change the Port number in the mobile App to match the Cam port, I can see each one... but isn't there a way to see all at once even if you are using NVMS 7000 Client on a PC? or iVMS 4200?

Sorry for being lame... would appreciate a few pointers if you all have time...

Thanks!
Dave

 

[fenderman]

@dddhorn If you want to see all the cameras at once, you have two options..1) see of the software has a built in webserver, this will allow you to connect to the pc running the software and pull the cameras at once..hikvision indicates that they added the webserver function to the latest software..not sure.
2) open a port for each camera, and setup each camera individually in the mobile app.

 

[dddhorn]

OK, thanks! option 2 is what I am doing now... I have not been able to find out how to access the webserver, if it is even there... so for now I will just stick with your option 2.

Thank you for the feedback!
-Dave