- VCA Target Highlight does not exist on playback or live view
- Minimum (5 seconds) or maximum possible pre-record (30 seconds) on camera do not work. Auto Event playback starts 5 to 10 seconds after the target is gone on any resolution or bit rate for DS-2CD2047G2-L ColorVu. No option to manually move playback cursor during this above Auto event playback problem. At least there should be an option since the pre-record problem is well known to Hikvision.
- Smart Event-> Intrusion Event area previously set on 2CD2047G2-L ColorVu, is missing in settings of same camera through DS-7608NXI-K2 although VCA mode is set By Camera
- Altering and saving event settings through DS-7608NXI-K2 NVR sometimes resets all area settings to default for all cameras by disappearing or filling alarm areas
- There is no option for Events to send an Audio Alarm sound through HDMI on a speaker monitor or TV. There is only a Buzzer Alarm and a Notify Surveillance Center Alarm
- Event alarm causes a loss for about 5 recorded seconds(skipping frames) on older DS-KV6113WPE1 and some times on 2CD2047G2-L ColorVu
NVR DS-7608NXI-K2 - hardware B-R-K20A9_K20A9-00 - firmware V4.73.006 build 221108
- Thread starter alfaclvi
- Start date