I just bought DS-7616NI E2/P8 (English Version) and IP Cameras(DS-2CD2032, DS-2CD2332, DS-2CD2132F-IS),
all cameras are chinese version with 5.2.5 multilanguage firmware, from Aliexpress.
The firmware version of NVR is 3.3.1 with english language only. I connect all ip cameras to NVR by using POE port and
configure camera using manual method. Everything seems working fine.
However the push notification is not working with IVMS-4500(both Iphone and Android).
So I dedide to upgrade the NVR firmware to 3.3.4 Multilanguage (downloaded from Hikvision Europe).
Upgrade process is fine. After that the NVR does not see "DS-2CD2132F-IS" camera (No LED shown), the others are fine.
If I connect power supply to camera, now NVR can see it and works fine.
How to configure the NVR to connect "DS-2CD2132F-IS" and use power from NVR ?.
*Remark now push notification is ok.
all cameras are chinese version with 5.2.5 multilanguage firmware, from Aliexpress.
The firmware version of NVR is 3.3.1 with english language only. I connect all ip cameras to NVR by using POE port and
configure camera using manual method. Everything seems working fine.
However the push notification is not working with IVMS-4500(both Iphone and Android).
So I dedide to upgrade the NVR firmware to 3.3.4 Multilanguage (downloaded from Hikvision Europe).
Upgrade process is fine. After that the NVR does not see "DS-2CD2132F-IS" camera (No LED shown), the others are fine.
If I connect power supply to camera, now NVR can see it and works fine.
How to configure the NVR to connect "DS-2CD2132F-IS" and use power from NVR ?.
*Remark now push notification is ok.
Last edited by a moderator: