Hello to everyone ... I pray everyone is safe and healthy ....
I need some guidance on an installation .. we are working on that just seems to be growing .. I have a church complex which has 3 buildings connected via a wired LAN terminated in 3 Ubitquiti configured managed switches. The NVRs are or will be shortly, have a LAN connection through switches. Building 2 presents has 8 cameras connected to a Hikvision DS7608NI-E2/8P NVR , all functioning as normal. Building 1 (Admin Office) will have a new Hikvision DS7608-E2/16P NVR . The client wants to have 4 of the cameras in Building 2 still viewed in the building, with all 8 cameras from the B 2 NVR also viewed in the administrator's office. The preference is to have all cameras recorded and managed in the Admin Office. I have in place a PoE injector but the cams are still powered off the NVR. I have installed some RJ 45 splitters (1 in 2 Out) for all 8 cameras. I also have a patch panel installed because this installation was fluid and wanted to have options if I needed them.
I know I will have to do some reconfiguration on the B2 NVR.
I am open to any and all of the collective expertise here ... I want to make it simple and not pour more complications on the network administrator . I have read the forums in the past and found them very informative. Thank you all !!!!
I need some guidance on an installation .. we are working on that just seems to be growing .. I have a church complex which has 3 buildings connected via a wired LAN terminated in 3 Ubitquiti configured managed switches. The NVRs are or will be shortly, have a LAN connection through switches. Building 2 presents has 8 cameras connected to a Hikvision DS7608NI-E2/8P NVR , all functioning as normal. Building 1 (Admin Office) will have a new Hikvision DS7608-E2/16P NVR . The client wants to have 4 of the cameras in Building 2 still viewed in the building, with all 8 cameras from the B 2 NVR also viewed in the administrator's office. The preference is to have all cameras recorded and managed in the Admin Office. I have in place a PoE injector but the cams are still powered off the NVR. I have installed some RJ 45 splitters (1 in 2 Out) for all 8 cameras. I also have a patch panel installed because this installation was fluid and wanted to have options if I needed them.
I know I will have to do some reconfiguration on the B2 NVR.
I am open to any and all of the collective expertise here ... I want to make it simple and not pour more complications on the network administrator . I have read the forums in the past and found them very informative. Thank you all !!!!