NVR5208-8P-4KS2E Power consumption

[pandamac]

Hello all !

I tried looking it up but I’m terrible as it seems in trying to find the info. I’m purchasing the above nvr and was wondering if I would have a power issue with the following cameras.

1x ‎SD49425XB-HNR
2x IPC-T5442TM-AS
2x IPC-T5449H-ASE-D2

The main concern I have is the ptz camera. If I need to get an injector then I will. But I wanted to ask the community first before ordering!

Thanks!

 

[Timokreon]

I have the 5216-16p-4ks2e, and currently running 11 cameras, including the 49225xb. Everything runs fine for me.
You should be able to run the 49425xb without any problems. The NVR states 25.5W for a single port, 130W total.

 

[pandamac]

I have the 5216-16p-4ks2e, and currently running 11 cameras, including the 49225xb. Everything runs fine for me.
You should be able to run the 49425xb without any problems. The NVR states 25.5W for a single port, 130W total.

Ah appreciate the response. What was confusing me if it was per port, or just the port alone if the other Ports weren’t being used.

 

[Timokreon]

I'm using 58W total right now, during the day. At night, I think it jumps to in the mid 60's due to the IR coming on.
If I remember correctly, the 49225 I'm running uses about 18W at night with the IR on.

You could always try things out and see how it goes. Can always grab a POE+ if needed down the road.