Please! Help me get the original .bin file for the XMEYE NVR. CPU Hi3535 + 4GB RAM.

V

vyanhdai

n3wb
Mar 9, 2017
10
1
Hi everybody! I have some NVRs from Xiongmai Tech, it was hacked and could not boot. NVRs use XMeye software. I would like to ask for the original ROM flash, NVR using Hi3535 CPU and 2 x 2GB RAM. Please help me, give me a .BIN file to upgrade the software with the tool. Thanks you very much!
 

Attachments

  • IMG_UPLOAD_20170428_094208.jpg
    IMG_UPLOAD_20170428_094208.jpg
    586 KB · Views: 47
  • IMG_28042017_195032_HDR.jpg
    IMG_28042017_195032_HDR.jpg
    2.3 MB · Views: 48
Last edited:
Thank you! But I need flash ROM, not those upgrade files. The link you sent me has only an upgrade file. My NVRs can not be displayed.
 
Have you connected to the serial console on the NVR?
If u-boot is still active and working, you may be able to write the firmware components to the flash using the built-in facilities.
 
I usually upgrade the program by putting the IC into the device programmer. I do not know how you do, please help me your way!
 
Currently, I do not have the .bin file of those NVRs. And no NVR is still active to copy the ROM file.
 
Last edited:
Hi all
Can someone of you help me with found the flash file for Enster super mini NVR model:N9000-16EX becaus I put wrong firmware and is totaly broken I check all internet and I can not found this file
Thanks in advance for you support
 
You must log in or register to reply here.
Top Bottom