I got this
DC18V-60V to 12V Buck converter Passive PoE Splitter Cable Power Over Ethernet | eBay
to use on my hikvision cam cause I thought I fried the poe board. Turns out I didnt fry it and poe works fine.
However when i plug the cable from the poe switch into this device,then ONLY plug the rj45 plug to camera,I get power and data.
Looking at the rj45 plug on the splitter I see only pins 1,2,3,6 are connected(which I assumed it would be).
Unless i'm misunderstanding which pins POE uses, how is this possible?
DC18V-60V to 12V Buck converter Passive PoE Splitter Cable Power Over Ethernet | eBay
to use on my hikvision cam cause I thought I fried the poe board. Turns out I didnt fry it and poe works fine.
However when i plug the cable from the poe switch into this device,then ONLY plug the rj45 plug to camera,I get power and data.
Looking at the rj45 plug on the splitter I see only pins 1,2,3,6 are connected(which I assumed it would be).
Unless i'm misunderstanding which pins POE uses, how is this possible?
As an eBay Associate IPCamTalk earns from qualifying purchases.