Ed Boyer
Young grasshopper
I would like to purchase a NVR5216-4ks2 and a PTZ1A225U-IRA-N from Andy, any recommendations on a POE switch to use. Thanks
how many cams? Just 2 this is good:I would like to purchase a NVR5216-4ks2 and a PTZ1A225U-IRA-N from Andy, any recommendations on a POE switch to use. Thanks
ED - I have the setup you are looking to purchase. I found both the TP-Link switch (8 port) and the 24-port V7 Switches I have, not able to handle the power requirements even though they are both rated as POE+ switches. The PTZ1A225U-IRA-N would just continually reboot forever until it was unplugged. Ultimately, I went with an external POE+ power injector, made by Trend Net, and that works great. Just a thought on what that camera seems to require.I would like to purchase a NVR5216-4ks2 and a PTZ1A225U-IRA-N from Andy, any recommendations on a POE switch to use. Thanks
It is a TRENDnet TPE-115GI, purchased via Amazon.Thanks for the info, do you happen to know the model # of the power injector?
It goes between camera and non-POE.Does this take the place of a POE switch or does it go between the camera and the switch.
I'm looking for a decent 8 port switch and see this one recommended a few times. I am a bit concerned it only has 60w of total power which is pretty lame for 8 ports isn't it? Any recommendations on a reasonably priced switch that will actually be able to handle 8 cameras.or spend a bit more for 8 ports:
https://www.amazon.com/GS1008HP-Gigabit-Ethernet-Fanless-Desktop/dp/B07LH8R3FH
That should be more than enough. In reality you'll probably be using around 5w per camera, if not less.Nice, thanks looney. Total of 123w which is double most of the others switches. Just off the top of your head, would 15w per port be fine for the 2mp Starlight cameras if all 8 ports were used?
60w can handle 5 25x PTZ with IR lights. It depends on what you are installing.I'm looking for a decent 8 port switch and see this one recommended a few times. I am a bit concerned it only has 60w of total power which is pretty lame for 8 ports isn't it? Any recommendations on a reasonably priced switch that will actually be able to handle 8 cameras.