Port Changing Andowl Q-S4

[Radio_Gamma]

Hi. I’ve bought an Andowl Q-S4 camera, the CareCam pro app gives me some issues and I decided to view my camera in Onvif mode. When I search the camera in lan the default port is 8899 but if I have more than 1 camera I can’t add it because they have the same port. Anybody know how to change the port to the camera?

 

[TonyR]

When I search the camera in lan the default port is 8899 but if I have more than 1 camera I can’t add it because they have the same port.

But aren't the IP addresses for each camera unique?

 

[Radio_Gamma]

each camera has a different ip address but the same port

 

[sebastiantombs]

Think of the IP address as the room in a hotel and the port as the bed. Every room has a different address even though the bed is the same. No conflict at all.

 

[Radio_Gamma]

but when I do the port mapping whit this cameras I can’t add more than 1 camera because the ports conflicts even if they have a different IP address