Power Adapter for Hikvision DS-2CD2432F-IW

[bbbddd]

Does anyone know what type of power adapter is needed for a DS-2CD2432F-IW? I haven't been able to find one anywhere. Thanks!

 

[Andy]

Does anyone know what type of power adapter is needed for a DS-2CD2432F-IW? I haven't been able to find one anywhere. Thanks!

According to the data sheet this camera requires 12 VDC +/- 10% or 48V POE Power over Ethernet which is typically provide by a Ethernet Switch with POE capability or a POE Injector in line with the Ethernet cable. If you use the POE Switch you do not need a separate power supply. If you choose to go separate power supply a 12VDC > 5 watt power supply is easy to online or at places like Radio Shack

 

[fenderman]

You need a 12volt adapter i believe its one amp...if you have an old linksys router laying around like the e2000 or e3000 they use the same adapter. Alternatively you can use this injector http://www.amazon.com/gp/product/B001PS9E5I/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 ...you can still use the camera over wifi while powering it via the Ethernet port using the injector. This is nice because you can adjust the cable length... You can also use one of these that is less bulky than the trendnet and plugs directly into the wall outlet http://wrightwoodsurveillance.com/index.php?main_page=product_info&cPath=67&products_id=318

 

[digger11]

Specs for the 2432F say a max of 5W at 12V. A 500mA gives you 6W at 12V, so it will suffice, or a 1A will give you more headroom.

I've used both of these on 2432F cameras:
A regulated 500mA http://www.amazon.com/gp/product/B000VRL632
An unregulated 1A http://www.amazon.com/gp/product/B002O9QM5C

 

[networkcameracritic]

If you are using it with WiFi, the least expensive is a 12V wall wort adapter with a 2.1mm connector which is pretty standard. I don't use WiFi with mine, so it's powered via the Ethernet cable that connects it.