Problem with REOLINK doorbell camera

K

kruuth

Getting the hang of it
Apr 26, 2017
130
29
I have an REOLINK doorbell and it suddenly stopped working. I don't know what is wrong. The light is white, and solid, but then flashes white four times before going back to solid white. I tried long pressing the reset button but that didn't do anything as far as I can tell. I don't hear any sound or anything, maybe a low popping sound but that's all. It's wired using the normal doorbell hardware if that makes sense.
 
  • Sad
Reactions: David L
Do you still the factory power supply that came with it? I would test it out with that. Your doorbell transformer could be the issue but it’s a good place to start.
 
  • Like
Reactions: David L
kruuth said:
I have an REOLINK doorbell and it suddenly stopped working. I don't know what is wrong. The light is white, and solid, but then flashes white four times before going back to solid white. I tried long pressing the reset button but that didn't do anything as far as I can tell. I don't hear any sound or anything, maybe a low popping sound but that's all. It's wired using the normal doorbell hardware if that makes sense.
Click to expand...
support.reolink.com

Introduction to the Status Light of Video Doorbell Cameras

This article will introduce the meaning of the status light on your video doorbell PoE / WiFi camera and how to configure sta...
support.reolink.com support.reolink.com

You may want to post this message on this Thread:

New Reolink Wired POE Doorbell Cam ?

Recently found a few release articles and videos by Reolink on their new POE Doorbell Camera. Per comments by Reolink it's ONVIF and RTSP compliant. Although I've been running a YooSee SD-M5 POE doorbell somewhat successfully for several years now I check back here from time to time to see if...
ipcamtalk.com ipcamtalk.com
 
Ok I think something might be up here....when I replaced the transformer I removed that little voltage regulator from my ring doorbell. I'll put that back and see what happens.
 
  • Like
Reactions: David L
kruuth said:
Ok I think something might be up here....when I replaced the transformer I removed that little voltage regulator from my ring doorbell. I'll put that back and see what happens.
Click to expand...
Someone in the other Thread mentioned there are wires that came with our Doorbell that bypasses our Chimes.
 

New Reolink Wired POE Doorbell Cam ?

Was wondering if anyone knows "if" this doorbell will work with my 16 channel Lorex NVR. Several years ago I sucessfully installed a Yoo-See SD-M5 video doorbell and connnectd to my Lorex NVR via a Ubiquiti 802.3af Gigabit PoE Converter. The SD-m5 works pretty good but I was hoping to upgrade...
ipcamtalk.com ipcamtalk.com
 
You must log in or register to reply here.
Top Bottom