Hi to all, I've a problem with ipcam in object.
These are its firmware features:
Device TypeSD22204T-GN-W
Software Version2.600.0000.0.R.T4.484, Build Date: 2017-06-01
WEB Version3.2.1.456631
ONVIF Version2.42(V2.2.0.403029)
S/N3E03BFAPAM00001
The problem is: tour is not enable. I mean, when I click on PTZ -> Functions I see tour, but after some seconds it disappears.
Recently i solved same issue with another SD22204T-GN-W upgrading firmware to 2.640.000 but, with this camera,I cannot upgrade. In fact, every time I try to upgrade i see this in log:
Detailed Information
Time:2020-11-25 22:24:41
Username:System
Type:Hot swap
Content:
Action: Insert Device
BUS: MMC
Device Name: /dev/mmc0
Logic No.: -1
Media: FLASH
Physical No.: 0
Can someone help me please?
Thank You
Gianluca
These are its firmware features:
Device TypeSD22204T-GN-W
Software Version2.600.0000.0.R.T4.484, Build Date: 2017-06-01
WEB Version3.2.1.456631
ONVIF Version2.42(V2.2.0.403029)
S/N3E03BFAPAM00001
The problem is: tour is not enable. I mean, when I click on PTZ -> Functions I see tour, but after some seconds it disappears.
Recently i solved same issue with another SD22204T-GN-W upgrading firmware to 2.640.000 but, with this camera,I cannot upgrade. In fact, every time I try to upgrade i see this in log:
Detailed Information
Time:2020-11-25 22:24:41
Username:System
Type:Hot swap
Content:
Action: Insert Device
BUS: MMC
Device Name: /dev/mmc0
Logic No.: -1
Media: FLASH
Physical No.: 0
Can someone help me please?
Thank You
Gianluca