PTZ override motion zones setup help

lcam

Getting the hang of it
Joined
Aug 29, 2018
Messages
142
Reaction score
30
Location
US
This used to work but I installed a new PTZ in the same location with the same settings in BI and now the override zones are not working the way they did before.
I have the zone A on the Trigger tab set to cover the whole image. I set the override mask for preset 1 to ignore some of the image. I still get triggers on preset 1 so it appears the override is not working or maybe I am doing something wrong.
Any ideas?
 

lcam

Getting the hang of it
Joined
Aug 29, 2018
Messages
142
Reaction score
30
Location
US
Hmm okay I thought that this would be easy to answer for someone since I must be doing something simple wrong.
 

lcam

Getting the hang of it
Joined
Aug 29, 2018
Messages
142
Reaction score
30
Location
US
To work around this issue I modified zone A for the camera on the trigger tab. This is obviously not what I want since this zone will be modified for every preset. I want to modify the zone for the first preset only but when I do it gets ignored by BI so I can still use some help.
 
Top