I purchased a SUNBA. Their instructions were to begin by logging in using my default browser and going to the typical 192.168.0.?, which I did and I got the camera working including some presets. I am now trying to set up my BLUE IRIS SOFTWARE. I have the camera working within BlueIris. My problem is the PTZ will not work in BlueIris - only the SUNBA web browser. How do I pass over the controls to BlueIris?
PTZ problem . . .
- Thread starter NightRidr
- Start date
Ssayer
BIT Beta Team
Depending on the model of the SUNBA, there is an enable PTZ setting of SUNBA, which is what I've always used. YMMV
SUNBA Auto Tracking PTZ Camera PoE+ Outdoor, 36X Optical Zoom 5MP Smart Security Dome, RTMP for YouTube Live Streaming, Two-Way Audio, Night Vision up to 1500ft (P636 V2, Performance Series)
--------------------------------------------------------------
don't see anything with OXML? I am using ONVIf to get the camera working. The only thing I see to "enable PTZ" is enabled - still not working
-----------------------------------------------------------------------
YMMV, I have PTZ enabled in the settings
--------------------------------------------------------------
don't see anything with OXML? I am using ONVIf to get the camera working. The only thing I see to "enable PTZ" is enabled - still not working
-----------------------------------------------------------------------
YMMV, I have PTZ enabled in the settings
Broachoski
Getting comfortable
If you select SUNBA in the video-configure tab then you can try each of the 3 models that is offers. Sometimes they work, sometimes not. If the video fails then leave it Generic/ONVIF but select SUNBA in the PTZ/Control tab.
These "generic" cameras can be a pain. I have had to go thru the list of cameras and try different name brands until I hit one that worked.
These "generic" cameras can be a pain. I have had to go thru the list of cameras and try different name brands until I hit one that worked.
Broachoski, I followed your instructions to the letter - no luck. I wonder if it could be my port? I changed the port (for security reasons) and I don't know if I opened that port in my router? I know I can't get my BI phone app to work which was going to be my next question.
Starglow
Getting comfortable
This video from Sunba gives instructions on how to fix the PTZ problem.....