Qsee QT428 DVR and BI

J

John Sutherland

n3wb
Nov 16, 2016
11
3
I have a Qsee QT428 and I have tried all sorts of settings in Blue Iris version 4.4.8.3 x64. I cannot get a connection to work. I have BI working with my Reolink and Foscam cameras just fine.

Anyone know where I can get settings for the QT428? I connect via the web browser on port 83. I have tried all sorts of combinations. Here are the results of the Find/Inspect button in BI:

Opening port 83...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
HTTP 404
Opening port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done
 
John Sutherland said:
I have a Qsee QT428 and I have tried all sorts of settings in Blue Iris version 4.4.8.3 x64. I cannot get a connection to work. I have BI working with my Reolink and Foscam cameras just fine.

Anyone know where I can get settings for the QT428? I connect via the web browser on port 83. I have tried all sorts of combinations. Here are the results of the Find/Inspect button in BI:

Opening port 83...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
HTTP 404
Opening port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done
Click to expand...
try using the hikvision or dahua nvr/dvr profiles...also there are several qsee profiles, try them all.
 
Thanks for the quick reply. I will give hikvision and dahua a try.

The web server on the QT 428 is running on port 83, no problem connecting via a web interface on that.

The other port that is used by the QT Dvr is 6036. This DVR does not seem to have RTSP or ONVIF capabilities. I tried all the Qsee profiles, but the ports it tries to use are 9000, or 536, or 8999 for ONVIF. I replaced the Media/video/RTSP port with 6036....but no luck. Not sure what the path is for the video, I just tried all the Qsee default ones while trying to replace the Media/video/RTSP port with 6036. I will not try the hikvision and dahua.

Thanks again,

John
 
John Sutherland said:
Thanks for the quick reply. I will give hikvision and dahua a try.

The web server on the QT 428 is running on port 83, no problem connecting via a web interface on that.

The other port that is used by the QT Dvr is 6036. This DVR does not seem to have RTSP or ONVIF capabilities. I tried all the Qsee profiles, but the ports it tries to use are 9000, or 536, or 8999 for ONVIF. I replaced the Media/video/RTSP port with 6036....but no luck. Not sure what the path is for the video, I just tried all the Qsee default ones while trying to replace the Media/video/RTSP port with 6036. I will not try the hikvision and dahua.

Thanks again,

John
Click to expand...
There is a q-see QT option that uses 6036, that is likely the correct one.
 
I have Q-See QT5716. I have been trying to find a way to publish a stream from one camera to a website. I can view the cameras in a browser through the QT interface but have had no luck getting a stream.
How did you get it? I tried rtsp://192.168.1.11:6036/cam/realmonitor?channel=1&subtype=00&authbasic=Password but as you said there is no RTSP on this series.
 
You must log in or register to reply here.
Top Bottom