RE: Proper wiring setup for Solar power with HIKvision DS-2CD2132F-IWS

[Rock_in_WA]

Hi Everyone,

I'm trying to set up my HIKvision camera for Solar power
and had a couple of questions about how to wire things up.

I'm planning to use a Renology 100 watt solar panel
paired with their 30Amp charge controller to charge
a UPG 35 Ah (85980/D5722) battery.

The things I'm unclear on is where to find an appropriate
power lead to connect the camera to the battery ?
( neither HIKvision or Renology seem to sell any )

And wether I would need any kind of a voltage regulator
or fuse to protect the Camera from any possible damage
due to power fluctuations by the battery ?

I'm considering buying a second AC/DC adapter for the camera
cutting off the wire from it & using that to connect to the battery
but that seems really cheesy.

Any advice on these two questions would be most appreciated.

Thanks,

Rock_in_WA

 

[Rock_in_WA]

Hi Again Guys,

Also wanted to ask if anyone might know the dimensions
of the power plug for the DS-2CD2132F-IWS ?

I'm thinking that it is probably the "standard"
5.5 x 2.1 MM, but that's just a quess.

Thanks Again,

Rock_in_WA