BobW55
Getting the hang of it
- Joined
- Apr 8, 2015
- Messages
- 163
- Reaction score
- 46
I have a Hikvision NVR, and 2 IP PTZ cameras.
My Illuminati is mounted on the rear of the house. Originally I wanted it to patrol 3 areas and use auto tracking if trip lines were crossed. later found the camera has to be in a fixed position to do auto track. Really dumb if you ask me. so I deleted all my trip wires.
I now have a 5 position patrol setup with a 30 second dwell at each stop. I have it set to record movement only 24/7 with 10% sensitivity.
What I am seeing is that it recording/detecting the pan movements as motion detection. Is there a camera/NVR setting to turn this off?
My Illuminati is mounted on the rear of the house. Originally I wanted it to patrol 3 areas and use auto tracking if trip lines were crossed. later found the camera has to be in a fixed position to do auto track. Really dumb if you ask me. so I deleted all my trip wires.
I now have a 5 position patrol setup with a 30 second dwell at each stop. I have it set to record movement only 24/7 with 10% sensitivity.
What I am seeing is that it recording/detecting the pan movements as motion detection. Is there a camera/NVR setting to turn this off?