Hi
I have a KV6103-PE1 panel,
but all new firmwares are released only for KV6103-PE1 (B)
I did not find any detailed information about the difference between revisions, only a mention that there is more flash in B.
"Check your device hardware version on the lable of the back of the device before upgrade!
A version firmware is for the A version hardware which is alredy EOL.
B version firmware is for the B version of hardware which has a larger flash memory.
Flashing the A hardware version with the B firmware version might cause audio and stability issues with your device.
After such an upgrade, downgrading is not supported and might cause your device to become unresposive which can be fixed only be serial port upgrade."
I unscrew my panel and found Winbond 25q256jveq
Do you think it is possible to rewire the flash to the 25Q512JV and upload the firmware from the KV6103-PE1 (B) via the serial port?
What might be needed for this?
I have a KV6103-PE1 panel,
but all new firmwares are released only for KV6103-PE1 (B)
I did not find any detailed information about the difference between revisions, only a mention that there is more flash in B.
"Check your device hardware version on the lable of the back of the device before upgrade!
A version firmware is for the A version hardware which is alredy EOL.
B version firmware is for the B version of hardware which has a larger flash memory.
Flashing the A hardware version with the B firmware version might cause audio and stability issues with your device.
After such an upgrade, downgrading is not supported and might cause your device to become unresposive which can be fixed only be serial port upgrade."
I unscrew my panel and found Winbond 25q256jveq
Do you think it is possible to rewire the flash to the 25Q512JV and upload the firmware from the KV6103-PE1 (B) via the serial port?
What might be needed for this?