Replacement for the 4231F-AS

@TheE
the IPC-E3241F-AS replace the 4231f-as
the 5mp housing a little difference, the camera's IR also change to external one.

Both can work well, if want a higher resolution juse use the 5mp one. If just a normal watching 2mp is fine.
 
  • Like
Reactions: mat200 and TheE
EMPIRETECANDY said:
@TheE
the IPC-E3241F-AS replace the 4231f-as
the 5mp housing a little difference, the camera's IR also change to external one.

Both can work well, if want a higher resolution juse use the 5mp one. If just a normal watching 2mp is fine.
Click to expand...

Thanks for your time and help!
 
TheE said:
This is originally how I had the camera set up: Front door install with video clips

Is the upgrade of the 4231F-AS this camera? EmpireTech IPC-E3241F-AS-M 1/2.8” CMOS 2MP AI IR Fixed focal Dome Netw

Or this one? EmpireTech IPC-E35IR-AS-S2 5MP 1/2.7" CMOS IR Fixed-focal Dome Network

The new install will be for a small 9*7 server room with the light always on.
Click to expand...
The 5mp will give you an image with more height and less width than the 2mp....this can be very beneficial in some case uses...
 
  • Like
Reactions: looney2ns, EMPIRETECANDY and TheE
Hi,

what makes a camera to be suitable for a front door camera?
Is IPC-E3241F-AS-S2 useful in detecting movement (intrusion/trip wire) when placing in a very short distance from the door (about 20 inches - 50 cm ) ?

Thanks.
 
You must log in or register to reply here.
Top Bottom