Reset of HIK Vision DS-2CD2332 camera?

[gpower07]

Reset of HIK Vision DS-2CD2332 camera? I don't see reset in the back like the 2032 does. anyone know how?

 

[fenderman]

http://www.ipcamtalk.com/showthread.php?1881-Bricked-DS-2CD2332-I-anyone-can-help

 

[blake]

Reset button is in the pigtail.

 

[fenderman]

Reset button is in the pigtail.

I don't believe it's available on every version

 

[blake]

Hmmm on all my 2332 orders from milk, they have reset button pigtails. I think other suppliers have old stock.

 

[gpower07]

No pigtail!!

 

[blake]

Can you take a photo of the camera wiring?

 

[gpower07]

 

[fenderman]

Did you set the camera to only connect to a specific ip address?
Make sure you clear the browser cache...try deleting the plugin and re-installing it. If you have a plugin form a different firmware version still installed it may cause this issue.

 

[gpower07]

I did. and I do it remotely too. still don't work. even power cycled.

 

[fenderman]

I did. and I do it remotely too. still don't work. even power cycled.

Sorry, its not clear what you mean when you say "i did"
Did you disable or delete the plugin? Not just clear the history...actually delete the plugin? what browser are you using?
Did you set the cameras ip address filter option to only allow a specific ip?

 

[gpower07]

Sorry, its not clear what you mean when you say "i didn't set the camera to only connect to a specific ip address
Did you disable or delete the plugin? Not just clear the history...actually delete the plugin? what browser are you using? usine IE. and cleared history and deleted plugin.
Did you set the cameras ip address filter option to only allow a specific ip?

I didn't set the camera ip filter.

 

[gpower07]

Did you disable or delete the plugin? Not just clear the history...actually delete the plugin? what browser are you using? usine IE. and cleared history and deleted plugin.
Did you set the cameras ip address filter option to only allow a specific ip?[/QUOTE] I didn't set the camera ip filter.

 

[fenderman]

Does SADP pick up the camera? Try assigning the camera a new ip address and see if it works.

 

[gpower07]

Does SADP pick up the camera? Try assigning the camera a new ip address and see if it works.

yes....thre SADP pick up the camera. but failed to apply change!!!

 

[blake]

You might just have a bad camera if it won't even accept SADP tool changes.

 

[fenderman]

I would follow the instructions to reload the firmware..