Reset Osiris OS-I2-EEN5M

[dahuauser]

Hello, I own 2 cameras Osiris OS-I2-EEN5M that I would like to reset to use with a Dahua recorder, anyone know where I can find the reset button?

 

[TonyR]

The specs say it has a place for an SD card for storage; rotate the camera up/down until you find a door with 2 screws. Remove the door to see if there's a reset button under there.

 

[dahuauser]

Hello, this camera does not have an SD card, attached photo of the camera's identification sticker

 

[TonyR]

Then the specs are wrong OR the SD card, and maybe the reset button, is inside the camera.

 

[dahuauser]

Attached photo of the camera, no SD card slot available

 

[TonyR]

Attached photo of the camera, no SD card slot available

At least not visible.
If no other responses here, you might try their support.

 

[dahuauser]

Hello, I have already opened the camera, I do not immediately see a reset button there either.

 

[dahuauser]

Found the reset button, was able to reset, camera works, problem solved.

 

[TonyR]

Found the reset button, was able to reset, camera works, problem solved.

Great!
Care to share with us where you found it? It may help someone else.

 

[dahuauser]

Opened the camera and next to the lens there was a small circuit board with a small reset button on it, held down for 20 seconds until the green LED went out and the camera was reset.