Hi Guys
Please help me here!
Back in my old house, I had a Hikvision NVR and 4 Hikvision Cameras. I had those 4 cameras connected to ports 1, 2, 3 and 4 over POE. Everything worked well for many years. When I moved to my new house, I disconnected all the cameras without labelling which camera was connected to which port. In the new house, when I connected back these old cameras randomly to ports 1, 2, 3 and 4, they didn't work, so I connected to ports 5, 6, 7 and 8 and it started to work again. All well. Now I bought 4 more new Hikvision cameras but I can't get these new 4 cameras to work in old ports 1, 2, 3 and 4. I haven't installed these new cameras in any locations yet, instead connected to the NVR with a 1 meter LAN cable.
OLD HOUSE
Port1: old camera1 - worked
Port2: old camera2 - worked
Port3: old camera3 - worked
Port4: old camera4 - worked
Port5: empty
Port6: empty
Port7: empty
Port8: empty
NEW HOUSE
Port1: new camera5 - not working - network not reachable
Port2: new camera6 - not working - network not reachable
Port3: new camera7 - not working - network not reachable
Port4: new camera8 - not working - network not reachable
Port5: old camera1 - working
Port6: old camera2 - working
Port7: old camera3 - working
Port8: old camera4 - working
I can login into the WEB UI of all these 4 new cameras with the same IP that is configured in the NVR. Password for NVR and Camera is different but correct passwords are in use. I think, the ports 1, 2, 3 and 4 got messed up some how. How do I reset these ports 1 to 4? I do not want to reset the whole NVR as, what if the old cameras also stops working after the reset? What process must be followed when connecting a new camera to a port that was used by another camera?
NVR and Camera Models
DS-7108NI-SN-P
DS-2CD2145FWD-IS
DS-2CD2155FWD-IS
DS-2CD2146G2H-ISU
Regards,
Anish
Please help me here!
Back in my old house, I had a Hikvision NVR and 4 Hikvision Cameras. I had those 4 cameras connected to ports 1, 2, 3 and 4 over POE. Everything worked well for many years. When I moved to my new house, I disconnected all the cameras without labelling which camera was connected to which port. In the new house, when I connected back these old cameras randomly to ports 1, 2, 3 and 4, they didn't work, so I connected to ports 5, 6, 7 and 8 and it started to work again. All well. Now I bought 4 more new Hikvision cameras but I can't get these new 4 cameras to work in old ports 1, 2, 3 and 4. I haven't installed these new cameras in any locations yet, instead connected to the NVR with a 1 meter LAN cable.
OLD HOUSE
Port1: old camera1 - worked
Port2: old camera2 - worked
Port3: old camera3 - worked
Port4: old camera4 - worked
Port5: empty
Port6: empty
Port7: empty
Port8: empty
NEW HOUSE
Port1: new camera5 - not working - network not reachable
Port2: new camera6 - not working - network not reachable
Port3: new camera7 - not working - network not reachable
Port4: new camera8 - not working - network not reachable
Port5: old camera1 - working
Port6: old camera2 - working
Port7: old camera3 - working
Port8: old camera4 - working
I can login into the WEB UI of all these 4 new cameras with the same IP that is configured in the NVR. Password for NVR and Camera is different but correct passwords are in use. I think, the ports 1, 2, 3 and 4 got messed up some how. How do I reset these ports 1 to 4? I do not want to reset the whole NVR as, what if the old cameras also stops working after the reset? What process must be followed when connecting a new camera to a port that was used by another camera?
NVR and Camera Models
DS-7108NI-SN-P
DS-2CD2145FWD-IS
DS-2CD2155FWD-IS
DS-2CD2146G2H-ISU
Regards,
Anish
