RJ45 female to 8 pin screw connector

ctgoldwing

Getting comfortable
Joined
Nov 8, 2019
Messages
493
Reaction score
648
Location
Beacon, NY
Does anyone have any experience with these adapters?
1584147765358.png

I have to install a few more cameras in the woods and am not looking forward to crimping connectors on a ladder :(

These would definitely make it an easier job but will they cause any signal degradation to be concerned about?
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
16,443
Reaction score
38,162
Location
Alabama
Wow...how were you planning on weatherproofing that thing, man?

Also, wouldn't your camera's pigtail also be female?
 

ctgoldwing

Getting comfortable
Joined
Nov 8, 2019
Messages
493
Reaction score
648
Location
Beacon, NY
Wow...how were you planning on weatherproofing that thing, man?

Also, wouldn't your camera's pigtail also be female?
:) I have a second one of these mounted on the tree I am working on now:

1584219864392.png

It turns out I am going to crimp a connector on anyway. I tried to pull 2 cat6 cables through the 3/4 PVC conduit that already had a 14/2 wire in with no luck. So I'm only putting one camera there for now. I may end up putting a 4 port switch in the box in order to get another camera there. The only other choice I see is to replace the 95' of 3/4 with 1".

I can suck it up on the ladder for 1 connector.

Oh the gender issue :( I pulled the wrong pix up - they make both male n female.
 
Last edited:

ctgoldwing

Getting comfortable
Joined
Nov 8, 2019
Messages
493
Reaction score
648
Location
Beacon, NY
Thanks TonyR! This project has turned out not quite like planned :(

I started crimping the connectors inside last night and as soon as it warms a little today I'm going to install the crimp and 1 camera
 
Top