- Jan 20, 2017
- 3
- 0
I purchases 10 Hikvision cameras for my new house that is being built and I am currently just testing them to make sure it all works properly. I am toying with the idea of adding Cloud storage to the cameras via a company called Mangocam and this is where I am having issues. I cannot get a live view of my cameras at all and I am not sure what the deal is.
My equipment is as follows:-
Hikvision N7616NI-I2/16P NVR
Hikvision DS-2CD22542FWD-IS Camera
Hikvision DS-2CD2042WD-I Camera
Hikvision DS-2CD2142FWD-IS Camera
I currently have only 2 of the above cameras connected as I am just testing.
All ports are open and as confirmed with the websites Open Port Check Tool - Test Port Forwarding on Your Router and Open Port Check Tool
It allows me to add the camera to the Cloud storage website and when I go to live view it never shows an image and I think it has been narrowed down to a RTSP authentication error, does the camera have a different RTSP Username/Password to the log in details. I have changed the log in details from the standard and I am able to connect to the cameras when I hook my PC up to the NVR. (The IP range of the cameras is 192.168.254.XX and my local IP range is 192.168.1.XX)
I have tried loads of troubleshooting and have even turned off authentication on the cameras and that has made no difference at all and I am not sure what to try next. I have tried to load the stream in VLC as well and it asks me for a username/password and will not accept my details or even the default ones.
I can use the Hik-connect service as it keeps the videos for a week and I am leaning towards just doing that, but it frustrates me that I cannot get it to work as it is supposed to.
Any one here have any other pointers?
My equipment is as follows:-
Hikvision N7616NI-I2/16P NVR
Hikvision DS-2CD22542FWD-IS Camera
Hikvision DS-2CD2042WD-I Camera
Hikvision DS-2CD2142FWD-IS Camera
I currently have only 2 of the above cameras connected as I am just testing.
All ports are open and as confirmed with the websites Open Port Check Tool - Test Port Forwarding on Your Router and Open Port Check Tool
It allows me to add the camera to the Cloud storage website and when I go to live view it never shows an image and I think it has been narrowed down to a RTSP authentication error, does the camera have a different RTSP Username/Password to the log in details. I have changed the log in details from the standard and I am able to connect to the cameras when I hook my PC up to the NVR. (The IP range of the cameras is 192.168.254.XX and my local IP range is 192.168.1.XX)
I have tried loads of troubleshooting and have even turned off authentication on the cameras and that has made no difference at all and I am not sure what to try next. I have tried to load the stream in VLC as well and it asks me for a username/password and will not accept my details or even the default ones.
I can use the Hik-connect service as it keeps the videos for a week and I am leaning towards just doing that, but it frustrates me that I cannot get it to work as it is supposed to.
Any one here have any other pointers?