Setting Lighting Angle with API

jzobel

n3wb
Joined
Nov 16, 2021
Messages
11
Reaction score
2
Location
NY
Have SD6AL433XA-HNR. Looking to use a preset command to change the laser setting. I have gotten as far as being able to turn laser on or switching to zoom prio with API command. But I cannot interpret how to switch the laser angle. I can only change the angle in Web gui. Any help is greatly appreciated. Without the ability to adjust laser angle its not very useful. Its either blinding or nothing.

The command I use to switch to laser is:
192.168.XX.XX/cgi-bin/configManager.cgi?action=setConfig&Lighting[0][0].FarLight[0].Light=10&Lighting[0][0].NearLight[0].Light=90&Lighting[0][0].Mode=Manual

Capture5.JPG
 
Top