Setting multiple smart plans (IVS, SmartObjectDetection)

[Ettor33]

I wanted to know if it is possible to activate simultaneously multiple smart plans such as IVS and SmartObjectDetection in the new Web Gui under AI > Smart Plan...when I click either one all the other options are disabled.
I'm using a 5442TM-ASE-S3 cam.

 

[ludshed]

Some cams will only let you use this and/or that; heat map is usually the only other thing not disabled.

 

[bigredfish]

I wanted to know if it is possible to activate simultaneously multiple smart plans such as IVS and SmartObjectDetection in the new Web Gui under AI > Smart Plan...when I click either one all the other options are disabled.
I'm using a 5442TM-ASE-S3 cam.

On most cameras, including the 5442 series, unfortunately no.

If you buy a Dahua AI enabled NVR, you can theoretically run one plan on the camera and a different plan on the NVR

 

[ludshed]

On most cameras, including the 5442 series, unfortunately no.

If you buy a Dahua AI enabled NVR, you can theoretically run one plan on the camera and a different plan on the NVR

^^^
But be aware if you have the need for more than a couple that’ll be done by recorder instead of camera you’ll be limited to 2 or 4. Just did an upgrade where I had to put a 32 in where a 16 would have been enough because it was cheaper than replacing the 9 hik cameras.

 

[bigredfish]

Yep, and when you enable AI on the new NVR's it will restrict incoming bandwidth by up to 1/2