Setting up Flir cameras

[AG918]

Hi everyone,

I am migrating to BI from Honeywell NVR and having a problem with one camera - FLIR DNB13TF2. In the old Honeywell it was picked automatically and registered under a special type 'Private' with only TCP port settings - see the screenshot below:



I cannot find a right camera type in BI. Tried Generic ONIF, Dahua etc - no luck.
I also tried adding the port number to the URL, i.e. 192.168.15.13:35000. It works, but very unstable: works for 30 sec, then disconnects, then works again for 30 sec. The android app IP Cam View managed to find the cam and identify it as Dahua, Dahua DH DVR. It works perfectly fine on Android, but in BI. In BI it gets disconnected every 30 sec or so.

Any suggestions?

Thanks!

 

[concord]

According to iSPY, these might work:

rtsp://IPADDRESS:554/ch0
rtsp://IPADDRESS:554/cam/realmonitor

http://IPADDRESS/axis-cgi/mjpg/video.cgi

See: Connect to Flir IP cameras

 

[AG918]

Thanks Concord. I have managed to get it work in BI:
rtsp:/<IP Address>:<Port>/cam/realmonitor?channel=1&subtype=0

I also tried Luxriot Evo and Milestone XProtect Essential+. Luxriout could not find right settings automatically, but Milestone instantly picked a matching camera Digimerge DNB13TF2 and applied right settings from scratch.