Skipped Frames on MD/IVS/Alerts while recording to on-camera SD card

[c hris527]

I know some times it seems worse viewing through the web gui or smart pss but your video is a classic example of the issue. This issue is so weird, I do not have the issue using IVS since I updated the firmware on them. Its still skips using the motion line tho.

 

[Mike Mo]

The problem is in the code Dahua uses. They no doing recycle the code on their nvr and on camera

 

[SquareEyes]

So is BlueIris the only solution to skip frame detection?

Random thread resurrection, when you have a current thread IVS event skipping frames on the local microSD recordingon same topic, only serves to confuse matters for everyone and weakens the forum as a resource because search results get a lower signal to noise ratio.

 

[TechBill]

I was experiencing this on a SD card but it stopped once I hooked up my NVR and started recording to it.

 

[rado stefano]

I was experiencing this on a SD card but it stopped once I hooked up my NVR and started recording to it.

Are you still recording IVS on the cards as well or just continues?

 

[TechBill]

Are you still recording IVS on the cards as well or just continues?

I have not change anything on the card setting, just added a NVR so the card is still recording 24/7 and IVS. I will double check it to mage sure adding NVR didn't change anything on the camera setting

 

[rado stefano]

I have not change anything on the card setting, just added a NVR so the card is still recording 24/7 and IVS. I will double check it to mage sure adding NVR didn't change anything on the camera setting

Thanks