Some PoE switch basics, please...

Discussion in 'Accessories' started by JImCan, Sep 13, 2019 at 5:28 PM.

Share This Page

  1. JImCan

    JImCan n3wb

    Joined:
    Mar 31, 2019
    Messages:
    13
    Likes Received:
    2
    Location:
    Salisbury
    I have two, a Dahua and a BV-tech. Both appear to have the same specs and look similar except for the external case. They woth fine/the same. Reading the tech sheet... The two transmission modes are what may be confusing me: Standard @100 Mbps x 100M and Extended @ 10 Mbps x 260M.

    If everything works fine in Standard, why does switching to extended kill the signal/image ...and if the jack is placed in the 60w slot to the left - you also get nothing? Thanks.

    Jim
     
  2. aristobrat

    aristobrat IPCT Contributor

    Joined:
    Dec 5, 2016
    Messages:
    2,273
    Likes Received:
    2,004
    That sounds like ePoE which IIRC only works with cameras that specify state that they support ePoE.
     
    mat200 likes this.
  3. JImCan

    JImCan n3wb

    Joined:
    Mar 31, 2019
    Messages:
    13
    Likes Received:
    2
    Location:
    Salisbury