SRI-IPA690 Ip Camera

W

wayneh

n3wb
Sep 17, 2016
24
5
So I'm new to the forum but I have been playing with IP cameras now for five years. The PC I was running Blue Iris on crashed recently, and the CMS software that I used to set camera parameters for (shutter speed etc) went with the PC and I can't seem to find a copy of the same software to control it. I've emailed the folks in Italy a few times, and I downloaded and installed the OBA CMS software. It sees the camera fine, but when I go to the remote config menu to set camera parameters it says I need to log in. But I am already logged in. So I tried to log out, make sure BI is not running, play with this, plat with that, but the bottom line is I can't get the remote config to work. It did with the previous version. It is Version 3.1.0.4 Feb 2016.

Any advice other than throw out the camera? Which, BTW works ok.

Thanks

Wayne
 
Sorry, I should have told everyone that I already tried logging in directly to the camera first. The web access does not have access to the camera parameters, regardless of the browser.

Wayne
 
You must log in or register to reply here.
Top Bottom