Stream settings for my cameras

[SuperMiguel]

Hello all, i currently have about 6 IPC-T5442T-ZE and trying to find the best Stream settings for this camera when connected to blueiris. Here are the current settings of one of them:

Thanks!!!

 

[Sphinxicus]

drop the FPS to circa 15 and the I frame interval along with it, your CPU will thank you.

Have a read of this thread also. Some good discussion around the same subject.

 

[Old Timer]

I like to run my frames per second at 15 for both main stream and sub stream, and the I frame needs to be
the same as the stream, so motion detect works quicker.

I also run H.264 instead or H.265. Works better with Blue Iris to reduce CPU load.

 

[SuperMiguel]

I like to run my frames per second at 15 for both main stream and sub stream, and the I frame needs to be
the same as the stream, so motion detect works quicker.

I also run H.264 instead or H.265. Works better with Blue Iris to reduce CPU load.

Do you use H.264 or H.264B or H.264H?

Settings now after you all feedback:

 

[Old Timer]

 

[CrazyAsYou]

View attachment 93512

The only thing I would change on the above is a drop from 20 > 15 FPS/iframe - I think it would yeild a slighly better image during motion for the 4096 bit rate