YoKev7
n3wb
- Joined
- Sep 3, 2015
- Messages
- 4
- Reaction score
- 0
Ok, So I received my first IP cam (Hikvision 2332-I) along with a PoE switch, got everything plugged in and then went to setup/configure the cam and.... STUCK!
I can find the camera on SADP easily, and it stays listed there. However, when I try to modify and save anything I receive a pop-up: "Error: Failed to modify settings!" This is using the default password as instructed in the quick start manual: "12345." Even if I don't modify anything and enter this password I get the same error..
Any clues what could be happening here? Obviously the camera is visible on my network... but maybe the default password is different for some reason? Attaching a screen of SADP...
I can find the camera on SADP easily, and it stays listed there. However, when I try to modify and save anything I receive a pop-up: "Error: Failed to modify settings!" This is using the default password as instructed in the quick start manual: "12345." Even if I don't modify anything and enter this password I get the same error..
Any clues what could be happening here? Obviously the camera is visible on my network... but maybe the default password is different for some reason? Attaching a screen of SADP...
Attachments
-
32.3 KB Views: 56
-
55.6 KB Views: 56