For some reason my original installer cut the RJ45 connector and wired my POE Cat6 cabl;e directly to the cameras wires. Another individual then removed the camera without looking at the pairings. Can anyone tell me which colour wire from the camera goes to which PIN on an RJ45 cable?
My RJ45 cable has just two twisted pairs (orange and green) which go to pins 1,2,3 and 6 at my switch (ie T568B). I would like to know to which colour cable on the Swann camera I should splice each of these wires/pins.
I'm competent but not super technical and have had difficulty following some of the threads on similar topics.
Many thanks in advance for your help
My RJ45 cable has just two twisted pairs (orange and green) which go to pins 1,2,3 and 6 at my switch (ie T568B). I would like to know to which colour cable on the Swann camera I should splice each of these wires/pins.
I'm competent but not super technical and have had difficulty following some of the threads on similar topics.
Many thanks in advance for your help