T54IR-AS-S3 Constant Connection Drops After Firmware Update

JordanZ

Young grasshopper
Feb 19, 2018
30
6
I have two T54IR-ASS3’s that I updated to the most recent firmware from @EMPIRETECANDY ’s website (the Sept 2024 version). Since the update, I’ve had constant drops in the feed on both on the NVR. I did a default reset and that didn’t fix anything. The stream display on my Android device running tinycam Pro is also all messed up and garbled randomly but only for those two cameras. Any thoughts? Can I revert to the old May 2024 firmware? Attached image shows the frequency it’s occurring, however it only lasts a short period of time each time it happens.
 

Attachments

  • IMG_8740.jpeg
    IMG_8740.jpeg
    36.3 KB · Views: 7
  • Like
Reactions: EMPIRETECANDY
I believe you can roll back.
 
  • Like
Reactions: JDreaming
Rolling back the firmware didn’t correct the issue. Nothing else has changed whatsoever with the setup so no idea what is causing this. Almost appears to be at intervals but then I had a large section where it was fine.
 

Attachments

  • IMG_8764.jpeg
    IMG_8764.jpeg
    37.3 KB · Views: 2