Tapo C310 would change the ip even assign static

[Khan5874]

I got 10 channel hiseeu wireless Nvr using 6 hiseeu Cams on N1 Protocol and 3 tapos on onvif protocol on my non poe nvr
All cameras works smooth except one tapo c310 which is also assign on router.
I disabled dhcp on nvr to prevent changing its ip
Couldn't figureout what cause problem.

 

[TonyR]

I got 10 channel hiseeu wireless Nvr using 6 hiseeu Cams on N1 Protocol and 3 tapos on onvif protocol on my non poe nvr
All cameras works smooth except one tapo c310 which is also assign on router.
I disabled dhcp on nvr to prevent changing its ip
Couldn't figureout what cause problem.

IP's aren't made "static" in the router, that is done in the device or camera. However, most routers allow you to make a reservation for a DHCP-assigned IP so that it will not be assigned to another device.

My 2 Tapo C-110's received an update a while back that allowed me to assign them a static IP using the Tapo app and not continue to operate DHCP as they were when I first bought them. Ideally, when assigning static IP's one should use IP's that are unique AND are OUTSIDE of the router's DHCP pool.

Is there a firmware update for the 310 that allows it to be configured with a static IP or have you already implemented that?