Techage pin out wire colours

[Ranj]

hello there
Just bit of in trouble to fix this Techage camera it's rj45 socket pin broken due to corrosion. Opened up the socket to figure out wire colour for each pin but can't work it out correctly. It got 11 wires. I think extra wires are for auxiliary power. Camera model no is IPC-BT619-2.0
Any help is appreciated

 

[alastairstevenson]

Opened up the socket to figure out wire colour for each pin

In that case you have all the information you need to know what wire goes to what pin. What's the problem?

 

[Ranj]

In that case you have all the information you need to know what wire goes to what pin. What's the problem?

The way socket was encapsulated made the process of opening it and seperating wires broke some wire connections to the solder on the board. So far I have worked out wires colours as below in respect to the numbering on the board
Green>3
Yellow >5
Green/white>6
Blue>7
Blue/white>8
and it looks like
Grey>1
White>2
but not sure. There are 2 black wires, 1 purple and 1 red which broke from the board solder.
On the board numbering are 1-8 for wire soldering on side and underneath 1and 2 on one side and 3 and 4 on other side. This rj45 socket also has a yellow and green led on each side and a auxiliary power jack ( which supplier said when I bought the camera) at the bottom.
I can get the IR lights to lit with all the attempts I tried to rewire.