The lowest priced dahua 3mp cameras!

Feb 24, 2015
13
4
attachment.php

attachment.php

attachment.php

attachment.php

If you have any questions or would like to expand your current security camera system feel free and give me a call.
Remember for complete systems we offer great discounts!


Steven Scott
918-710-3652
sscott@nellyssecurity.com


 

Attachments

  • 143310205.jpg
    143310205.jpg
    99.5 KB · Views: 163
  • 143349705.jpg
    143349705.jpg
    45.6 KB · Views: 163
  • 143350905.jpg
    143350905.jpg
    45.3 KB · Views: 164
  • 143351405.jpg
    143351405.jpg
    51 KB · Views: 166
Where did the 1300 series come from? How are they different from the 4800 4300 series? I can't find them listed on dahua's site.
 
Last edited:
Here is the link to the 1200 series which is basically what these are. The reason they are 3MP now is because Dahua released a new firmware that upgraded them to 3MP, they just have not updated their website yet to reflect the 1300 series.

The 4800 series is their new 4K lineup, these are not 4K cameras just standard 3MP.
 
Hmm. Yes indeed 4800 is the 4K models... whoops... Apparently I meant to write 4300 series which looks almost identical to the 1200 series except that apparently the 4300 series has a different sensor with better low light capabilities.
 
1200 = Texas Instruments

4300 = Ambarella
 
That's correct. Although, we have done some testing and the 1300 series low light capabilities are surprisingly very good. I still think the 4300 series has the edge in that area but for the price it's hard to go wrong.
 
I have a couple 5MP cams with TI sensors (I think). They are the best I have at providing a clear, sharp picture at night.
 
Awesome! There is certainly nothing wrong with the TI sensors. Now you just need to try some of these 3MP TI cameras.. <img src="images/smilies/smile.png" alt="" title="Smile" smilieid="1" class="inlineimg" border="0">
 
I just received my 1300s, and as a first time Dauha user, im finding it someone difficult in getting started.

Can someone point me to a quick start guide for dahua cams? tried configtool2 configtool 1.5, 192.168.1.108... still can't get to the cam... the cam up, IR is active, POE switch is lit up... punting to the forum for help...

when i run the config tool, i get "Configtool is running now,please close it and restart installing." tried rebooting, no luck
 
Nelly's has got a nice video on the tube. If you have about 20 min. it might help... ? Dunno

 
Last edited by a moderator:
For some reason my cam was setup to use DHCP by default instead of 192.168.1.108 as the instructions indicate. I'm thinking I may have gotten a used cam now, but so far the it works fine.
 
No, one I discovered the ip, I was good...


Sent from my iPad using Tapatalk