Train CodeProjectA.I ?

[BORIStheBLADE]

So after going to CodeProject the accuracy with one of my cameras has got worse. I even lowered the min confidence but people walking in to my front door aren't picked up.The camera isn't placed right but I had success with DeepStack picking up 75% of people walking up. If I take a clip and run it through the AI test and tune it shows 80-90% person.
Any suggestions besides moving the camera would be appreciated.

 

[JNDATHP]

I have a similar camera position and am using ipcam-combined, CPAI 2.0.7 and BI 5.6.9.8. The below is 87% person.

 

[BORIStheBLADE]

I have a similar camera position and am using ipcam-combined, CPAI 2.0.7 and BI 5.6.9.8. The below is 87% person.

View attachment 153117

And the AI isn't tagging it?

 

[JNDATHP]

It is - 87% person.

 

[CrazyAsYou]

 

[CrazyAsYou]

So after going to CodeProject the accuracy with one of my cameras has got worse. I even lowered the min confidence but people walking in to my front door aren't picked up.The camera isn't placed right but I had success with DeepStack picking up 75% of people walking up. If I take a clip and run it through the AI test and tune it shows 80-90% person.
Any suggestions besides moving the camera would be appreciated.

What model size are you using? Also, have you tried using simple motion detection rather than edge vector in BI camera motion settings?

 

[BORIStheBLADE]

Let me check tonight after work when I get a chance.

 

[wittaj]

Where did you get the X-Ray model that could tell a skateboard was inside that Amazon box

 

[CrazyAsYou]

Where did you get the X-Ray model that could tell a skateboard was inside that Amazon box

it's a new one Mike is developing that I'm beta testing ipcam-x-ray.pt

 

[BORIStheBLADE]

What model size are you using? Also, have you tried using simple motion detection rather than edge vector in BI camera motion settings?

OK so in the settings AI tab I have default object detection on high and this is my camera setting. How do you verify what model size you have in the AI web page?

 

[CrazyAsYou]

On the CP.AI dashboard, click the info button and this pop-up appears, and you can see the default model size that is loaded.

 

[BORIStheBLADE]

On the CP.AI dashboard, click the info button and this pop-up appears, and you can see the default model size that is loaded.

View attachment 153613

Awesom. It was set to medium, I'll run it on high and see how it goes. Thanks!