Trendnet TV IP319PI / Hikvision DS-2CD2183G0-I

MediaGen

n3wb
Joined
Jan 29, 2020
Messages
2
Reaction score
0
Location
Germany
Hi, my Name is Björn from Germany.

I have 20 Trendnet Tv IP319PI (8mp - 4K) Cam‘s and about 10 Hikvision DS-2CD2183G0-I.

All Connectet to a new Hikvision NVR.
The Hikvision NVR Recognises the Trendnet Cam‘s. On the NVR Display, only the Mainstream works. The Substream show‘s „unsupportet Format“.
At the Web Interface from the NVR - everythings fine.

Is there a way to bring a Hikvision Firmware to the Trendnet Cam‘s? Wich One fit‘s?Because, many Features of the Hik NVR won‘t work with the Trendnet Cam, Including the Substream.
Or a Setup workarraound?
The Spec‘s and the whole Cam are optical the Same as the Hikvision DS-2CD2183G0-I.
I know, in the past many Trendnet Cam‘s are the same as the Hikvision and some Hikvision firmware‘s fit‘s direct to the Trendnet Cam‘s.
Thank you, for your Support!
 

max212

n3wb
Joined
Oct 12, 2020
Messages
3
Reaction score
0
Location
CH
Hi Björn - Have you found the proper solution meanwhile?
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,930
Reaction score
6,778
Location
Scotland
No. They work, but the issues are still the same. :-(
Suggestion :
In the camera web GUI Video/Audio selection - either directly or via Virtual Host, depending on how they are connected, under the Sub-stream stream type dropdown, check what's configured for Video Encoding.
If it's set to MJPEG, change it to h.264 and save that setting.
 
Top