Tripwire only recording on one of four cameras

[Tjames]

Hi there, sorry second post, new to the forum, still working out this Dahua camera system.

I have: N444E42 kit, which included the N41B1P2 NVR and N41BK2 cameras.

Ive setup tripwires on all 4 cameras, but only one of them seems to be working. All the settings are the same for each. Im not sure what the "smart plan" button means but ive clicked it off on each camera. Ive got the period set for 24 hours everyday.

Ive updated my cameras to the newer firmware of
DH_IPC-HX2X3X-Rhea_MultiLang_PN_Stream2_V2.800.0000008.0.R.190619

 

[bigredfish]

Smart plan must be ON for tripwire/Intrusion to work.

 

[teemu81]

Also you gotta make sure you're not using the H.265+ encoding

 

[Tjames]

Smart plan must be ON for tripwire/Intrusion to work.

Okay, I do have it on for all 4 cameras.

Also you gotta make sure you're not using the H.265+ encoding

Where do I find this setting? Ive set all the cameras the same so I dont know why only one works. When I do playback I get a blue bar in the timeline showing a tripwire, but only on 1 of 4 cameras.

 

[bigredfish]

Are the other cameras recording at all?

 

[JordanZ]

Also you gotta make sure you're not using the H.265+ encoding

H.265 or H.265+? What encoding should I be using to make IVS work?

 

[teemu81]

H.265+ is not compatible with IVS, if H.265+ is on, then trying to turn on the Smart Plan will return an error

 

[JordanZ]

H.265+ is not compatible with IVS, if H.265+ is on, then trying to turn on the Smart Plan will return an error

Okay. H.265+ is not even an option on my cameras. Still trying to troubleshoot my lack of push notifications for IVS events

 

[spenser911]

Hi there, sorry second post, new to the forum, still working out this Dahua camera system.

I have: N444E42 kit, which included the N41B1P2 NVR and N41BK2 cameras.

Ive setup tripwires on all 4 cameras, but only one of them seems to be working. All the settings are the same for each. Im not sure what the "smart plan" button means but ive clicked it off on each camera. Ive got the period set for 24 hours everyday.

Ive updated my cameras to the newer firmware of
DH_IPC-HX2X3X-Rhea_MultiLang_PN_Stream2_V2.800.0000008.0.R.190619

Are you sure you have the record schedule set correctly for the other 3 cameras and not just channel 1?