Trouble connecting 'some' Reolink cameras

looney2ns

IPCT Contributor
Joined
Sep 25, 2016
Messages
15,521
Reaction score
22,657
Location
Evansville, In. USA
Okay... here is my finding. Tested 1/100th, 1/250th, and 1/500th. The first two with gain set at default 0-50, for the 1/500th I turned it up to 70. Looks like 1/250th might be the sweet spot. Any other suggestions?

Note these are snapshots taken from the motion triggered video w/direct to disk record. Just noticed my timestamp is missing. Thinks I have to go turn that on in the Dahua camera settings.
Also, lower the noise reduction as much as you can stand it.
 

dragoneggs

Young grasshopper
Joined
Nov 30, 2018
Messages
54
Reaction score
21
Location
Seabeck, WA
This is getting fun! Wife is worried about me though. I should not have found BI and ipcamtalk! :D

Repostioned my cameras with the addition of a 5231 turret, and putting better use for my 5X Dahua . I now have a mix of Reolinks and Dahuas but I can see where the future is taking me w/ respect to camera!
 
Top