Just a question, how do you have 20 cameras connected to a 16 channel NVR? Are all cameras connected to the POE ports on the NVR?
Unable to log in to one of my Dahua cameras via the Dahua NVR interface
- Thread starter mat-with-one-t
- Start date
yes NVR-5224-24P-4KS2
2 big cameras run through poe 30 watt switches from NVR to switch. Same as always
2 big cameras run through poe 30 watt switches from NVR to switch. Same as always
bigredfish
Known around here
Again, it sounds like a browser issue
port 10080 - Bing
Intelligent search from Bing makes it easier to quickly find what you’re looking for and rewards you.
Something is off. In your opening post, you mention you have a NVR5216-16p-4ks2e NVR, which is a 16-channel recorder. Then you mention recently that you have an NVR-5224-24P-4KS2 NVR. I have never seen a 24 channel NVR - only 8, 16 and 32 channel. Which is it 16 or 32 channel?
Also, are you running one of the NVR ports to a switch which 2 cameras are connected to? Please explain your connections
I did not start this thread, and my NVR is a Dahua 24 channel I bought from Andy in 2022.
I am running 2 big Dahua auto tracking PTZ's as to not reach the limits of the NVR. They have cat 6 cable from NVR port to 33-watt switch and then cat 6 to the cameras. They have been running this way for some time. all equipment is running great. Just cannot log into cameras via internet explorer. 2 days ago, all was working fine, I made no changes and it just quit working. I have rebooted everything involved a few times.
Last edited:
It may very well be 24 channel. Here's one to see.
looney2ns
IPCT Contributor
Without knowing exactly how the system is wired/connected, it's difficult for me to make educated recommendations on how to resolve the issue. A rudimentary diagram of connections would certainly help to understand this installation.
I presume that you cannot access any of the cameras via the web icons on the NVR main page, yes?
What are the IP addresses in the list of cameras - do they all have 10.1.1.XX addresses?
I presume that you cannot access any of the cameras via the web icons on the NVR main page, yes?
What are the IP addresses in the list of cameras - do they all have 10.1.1.XX addresses?
The nvr has a single cat 6 cable hooked to my router. All 20 cameras are wired with cat 6 to the back of nvr. I cannot access any camera from IE icon on camera list. All ip address are as you described 10.1.1.XX.
Been a while, but don't you have to configure your computer to the same IP address as your nvr/cameras? 10.1.1.xx?
bigredfish
Known around here
No. The same network as the NVR , which he can reach fine.
Thats the popup he gets when he clicks the IE icon IN the NVR to open a camera
It should be more like this
bigredfish
Known around here
Show us your camera Registration page, something like this
No need to hide IP numbers here,. they are all internal numbers we ALL have inside our home and cant be reached remotely
