Unable to view camera at its highest quality. FIXED

[Coseno]

Greetings everyone!

I'm relatively new to the realm of IP cams, BI, RTSP, ONVIF, ports, and all the terminology I've familiarized myself with in recent weeks. Following extensive testing, I've concluded that Blue Iris is the ideal software for my requirements. While I've successfully added two of my IP cameras, one of them, the Tapo C200, isn't broadcasting at its maximum 2MP (1920 x 1080) resolution. Despite selecting /stream1, it persists at 0.9MP. I'm currently using the Demo version of BI.

Any assistance would be greatly appreciated. Thank you in advance!

 

[wittaj]

Try stream0

In many cases 0 is mainstream and 1 is substream.

 

[Coseno]

I tried stream0 and It doesn't work, according to TAPO's website, stream1 corresponds to max quality.

 

[Coseno]

I don't know in which moment the TAPO APP decided to change the quality of the stream.... it was at 720p....

 

[wittaj]

Oh what it could have been is if you cannot adjust the iframes to match the FPS, there can be a lag between when the substream changes to mainstream.

 

[Coseno]

I will monitor it to see if it happens again, thanks for your help